Overview

The M series is a full size machine designed for high sample out put. The Phoenix uses a modular system of construction so if your analysis program calls for 60,000 or 1000 samples per annum there is a Phoenix model specifically for that job.

Samples are dissolved and mixed into a lithium borate flux at temperatures ranging from 800 to 1250°C (Typical fusion temperature is 1050°C). This is done over oxygen-enriched flames using specially designed burners. The sample is automatically poured into pre-heated moulds. The moulds are then retracted over separate cooling jets for precise control of cooling.

Find Platinum Labware for this machine 

Technical Specifications

• Individual burner selection
• Variable speed swirl action
• Fully regulated air cooling (2 stage)
• Reset at any time
• Can be used at high altitude without modification separate mould heating and timing
• Can heat moulds up to 180gm
• Auto-lock crucible holders
• Adjustable pour & mould delay
• Individual burner manifold
• Oxygen injection option
• Pre melt option
• Ammonium iodide injector option
• Melt loss option
• LOI option
• See Data Sheet for further details

Alternative Models

• PHOENIX 3000/M - 6 Burners - 3 Glass Beads Produced Simultaneously
• PHOENIX 4000/M - 8 Burners - 4 Glass Beads Produced Simultaneously
• PHOENIX 6000/M - 12 Burners - 6 Glass Beads Produced Simultaneously